Vevor other manual workshop tools
1 report to CPSC, the latest made Oct 23, 2025. A report isn’t a recall.
Watch and the shortlist are kept with a free account, on every device. Your watch list. CPSC’s own search is on saferproducts.gov.
At a glance
From SaferProducts.gov, released Oct 25, 2026.
- 1report to CPSC
- Oct 23, 2025the latest report was made
- Oct 23, 2025the earliest
- 0with the company’s comments
- Brand
- Vevor
- Maker
- Vevor CorporationMakers, importers or sellers, as the reports name them
- Product
- Other manual workshop toolsCPSC’s product type: Other Manual Workshop Tools (code 881), in Home Maintenance and Structures: Tools & Hardware
By month
The numbers, as a table
| Month | Reports |
|---|---|
| October 2025 | 1 |
How badly anyone was hurt
- No one hurt 1 CPSC: Incident, No Injury
As each report says it, in short words; CPSC’s own words are under each.
The reports, as CPSC published them
Reports people made to the U.S. Consumer Product Safety Commission. CPSC publishes each one after sending it to the company named, and doesn’t guarantee they’re accurate. A report isn’t a recall.
Each report is the words of the person who made it, as CPSC published them. The company’s comments, where CPSC published any, are set apart as the company’s own.
CPSC, SaferProducts.gov public database export. Released Oct 25, 2026. Updated daily.
-
No one hurt Made Oct 23, 2025, sent to the company Nov 19, 2025, published by CPSC Dec 4, 2025
The product, in the report: Hydraulic pipe bender
The issue I had experienced was due to two different issues: 1) the base of the bender is mild steel and 1/2 thick. When the listing eye holes were drilled and tapped, the machining was done very sloppily and accordingly the lifting eyes (which restrain the springs to the base) very sloppily screw into the base, and in my case, on first use, the lifting eye pulled out of the threaded base, which caused the return spring to go flying, which if I werent already being careful of where I put my hands, I could have easily lost one or more fingers! 2) the pictured product shows the lifting eyes having a nut installed onto each eye prior to being screwed into the base. I believe this to be incorrect assembly, the lifting eye should be screwed directly into a carefully drilled and tapped hole, then the nut should be installed on the other side of the base plate. And the threaded part of the eye should be longer. Im very disappointed with the poor engineering, poor manufacturing and poor assembly, which could have caused severe injury. You must issue an immediate recall
- Model
- YYWGJ12T6G00MC6HJV0
- Serial number
- N/
A - Bought from
- Home Depot
- Bought
- Oct 10, 2025, about then
- Where
- Middletown, Pennsylvania: Home/
Apartment/ Condominium - Who was involved
- Age 70, Male
- The reporter’s relation to them
- Self
- As this report names them
- Brand Vevor, made or sold by Vevor Corporation
- How badly, in CPSC’s words
- Incident, No Injury
CPSC’s disclaimer
Disclaimer: CPSC does not guarantee the accuracy, completeness, or adequacy of the contents of the Publicly Available Consumer Product Safety Information Database on SaferProducts.gov, particularly with respect to information submitted by people outside of CPSC.
Word for word, from the disclaimer in CPSC’s export.
Sources
Sources
-
U.S. Consumer Product Safety Commission, SaferProducts.gov public database export.
Released Oct 25, 2026 and checked Oct 25, 2026. Updated daily. Public domain (U.S. Government work). CPSC asks to be credited, and that no endorsement be implied.
Reports of harm are from the U.S. Consumer Product Safety Commission (CPSC), on SaferProducts.gov. CPSC does not endorse Hearth Record.