QIDI Tech other portable or stationary power tools
1 report to CPSC, the latest made Sep 4, 2025. A report isn’t a recall.
Watch and the shortlist are kept with a free account, on every device. Your watch list. CPSC’s own search is on saferproducts.gov.
At a glance
From SaferProducts.gov, released Oct 25, 2026.
- 1report to CPSC
- Sep 4, 2025the latest report was made
- Sep 4, 2025the earliest
- 0with the company’s comments
- Brand
- QIDI Tech
- Maker
- ZHEJIANG QIDI TECHNOLOGY CO.,LTDMakers, importers or sellers, as the reports name them
- Product
- Other portable or stationary power toolsCPSC’s product type: Other Portable or Stationary Power Tools (code 809), in Home Maintenance and Structures: Tools & Hardware
By month
The numbers, as a table
| Month | Reports |
|---|---|
| September 2025 | 1 |
How badly anyone was hurt
- Hurt, no treatment 1 CPSC: Injury, No First Aid or Medical Attention Received
As each report says it, in short words; CPSC’s own words are under each.
The reports, as CPSC published them
Reports people made to the U.S. Consumer Product Safety Commission. CPSC publishes each one after sending it to the company named, and doesn’t guarantee they’re accurate. A report isn’t a recall.
Each report is the words of the person who made it, as CPSC published them. The company’s comments, where CPSC published any, are set apart as the company’s own.
CPSC, SaferProducts.gov public database export. Released Oct 25, 2026. Updated daily.
-
Hurt, no treatment Made Sep 4, 2025, sent to the company Sep 9, 2025, published by CPSC Sep 23, 2025
The product, in the report: Qidi Q1 Pro 3D printer
On September 1, 2025, my QIDI Q1 Pro 3D printer (purchased via Amazon, order #[REDACTED], less than 9 months old with light use) experienced a catastrophic overheating failure during a routine print. The printer displayed an error: Heater extruder not heating at expected rate, indicating potential thermal runaway. The silicone boot on the hotend solidified and crumbled to dust, the plastic shroud and sensor mount turned brown from extreme heat, and the printers base burned my hand 20 minutes after being unplugged, posing a severe fire hazard. I was home, preventing a potential fire, but the incident caused a burn injury to my hand. Photos of the damage are available at: initial photos and follow-up. QIDI Tech support has denied any fire risk, offering only a hotend and adapter board replacement, which does not address potential damage to the power supply or wiring. This aligns with reported Q1 Pro overheating and chamber heater issues in user communities (e.g., [REDACTED], [REDACTED], 2024-2025). The printer remains unsafe to operate, and Im pursuing an Amazon A-to-z Guarantee claim due to the sellers inadequate response.
- Model
- Q1 Pro
- Serial number
- 16383
- Bought from
- Amazon
- Bought
- Nov 29, 2024
- Where
- Manchester, New Hampshire: Home/
Apartment/ Condominium - Who was involved
- Age 55, Unspecified
- The reporter’s relation to them
- Self
- As this report names them
- Brand QIDI Tech, made or sold by ZHEJIANG QIDI TECHNOLOGY CO.,LTD
- How badly, in CPSC’s words
- Injury, No First Aid or Medical Attention Received
CPSC’s disclaimer
Disclaimer: CPSC does not guarantee the accuracy, completeness, or adequacy of the contents of the Publicly Available Consumer Product Safety Information Database on SaferProducts.gov, particularly with respect to information submitted by people outside of CPSC.
Word for word, from the disclaimer in CPSC’s export.
Sources
Sources
-
U.S. Consumer Product Safety Commission, SaferProducts.gov public database export.
Released Oct 25, 2026 and checked Oct 25, 2026. Updated daily. Public domain (U.S. Government work). CPSC asks to be credited, and that no endorsement be implied.
Reports of harm are from the U.S. Consumer Product Safety Commission (CPSC), on SaferProducts.gov. CPSC does not endorse Hearth Record.