Onefinitycnc other portable or stationary power tools
1 report to CPSC, the latest made Apr 26, 2026. A report isn’t a recall.
Watch and the shortlist are kept with a free account, on every device. Your watch list. CPSC’s own search is on saferproducts.gov.
At a glance
From SaferProducts.gov, released Oct 25, 2026.
- 1report to CPSC
- Apr 26, 2026the latest report was made
- Apr 26, 2026the earliest
- 1with the company’s comments
- Brand
- Onefinitycnc
- Maker
- Onefinity (Kirbre Enterprises Inc)Makers, importers or sellers, as the reports name them
- Product
- Other portable or stationary power toolsCPSC’s product type: Other Portable or Stationary Power Tools (code 809), in Home Maintenance and Structures: Tools & Hardware
By month
The numbers, as a table
| Month | Reports |
|---|---|
| April 2026 | 1 |
How badly anyone was hurt
- No one hurt 1 CPSC: Incident, No Injury
As each report says it, in short words; CPSC’s own words are under each.
The reports, as CPSC published them
Reports people made to the U.S. Consumer Product Safety Commission. CPSC publishes each one after sending it to the company named, and doesn’t guarantee they’re accurate. A report isn’t a recall.
Each report is the words of the person who made it, as CPSC published them. The company’s comments, where CPSC published any, are set apart as the company’s own.
CPSC, SaferProducts.gov public database export. Released Oct 25, 2026. Updated daily.
-
No one hurt Made Apr 26, 2026, sent to the company May 1, 2026, published by CPSC May 15, 2026
The product, in the report: Onefinitycnc X50 CNC machine with a redline 2.2 kw air cooled spindle kit sold by onefinitycnc in Canada to the US market.
I have a onefinity cnc manufactured by kilbre enterprises in canada, sold in the US. The CNC machine is an X50 model that has been upgraded with a 2.2kw spindle kit sold by onefinitycnc. It involves the addition of a 220volt vfd drive for the spindle and the spindle itself. This vfd drive that powered the spindle motor does not have a safety estop. I experienced a situation in which the spindle kept running with a 1/2” downcut bit in the collet after the toolpath had completed and the command to stop was issued. There is an estop on another controller in the system but it is not tied to this separate vfd upgrade. No software or hardware estop activation would stop this motor from spinning. I had to remove power from it. The hazard is there is no estop that stops this motor from rotating, in this case, at 18k rpm. It is common to wear hearing protection when operating and if I had not visually observed the tip of the bit rotating when starting to remove a dust boot around the rotating but, I could have easily severed a finger or very badly cut my hand.
- Model
- X50
- Serial number
- 2595
- Bought from
- Onefinitycnc.com
- Bought
- Mar 31, 2025, about then
- Where
- Colfax, California: Home/
Apartment/ Condominium - Who was involved
- Age 66, Unknown
- The reporter’s relation to them
- Self
- As this report names them
- Brand Onefinitycnc, made or sold by Onefinity (Kirbre Enterprises Inc)
- How badly, in CPSC’s words
- Incident, No Injury
CPSC’s disclaimer
Disclaimer: CPSC does not guarantee the accuracy, completeness, or adequacy of the contents of the Publicly Available Consumer Product Safety Information Database on SaferProducts.gov, particularly with respect to information submitted by people outside of CPSC.
Word for word, from the disclaimer in CPSC’s export.
Sources
Sources
-
U.S. Consumer Product Safety Commission, SaferProducts.gov public database export.
Released Oct 25, 2026 and checked Oct 25, 2026. Updated daily. Public domain (U.S. Government work). CPSC asks to be credited, and that no endorsement be implied.
Reports of harm are from the U.S. Consumer Product Safety Commission (CPSC), on SaferProducts.gov. CPSC does not endorse Hearth Record.