Ferosticker fire extinguishers
1 report to CPSC, the latest made Aug 3, 2026. A report isn’t a recall.
Watch and the shortlist are kept with a free account, on every device. Your watch list. CPSC’s own search is on saferproducts.gov.
At a glance
From SaferProducts.gov, released Oct 25, 2026.
- 1report to CPSC
- Aug 3, 2026the latest report was made
- Aug 3, 2026the earliest
- 0with the company’s comments
- Brand
- Ferosticker
- Maker
- MB AeroxfireMakers, importers or sellers, as the reports name them
- Product
- Fire extinguishersCPSC’s product type: Fire Extinguishers (code 701), in Home Maintenance and Structures: Home Security
By month
The numbers, as a table
| Month | Reports |
|---|---|
| August 2026 | 1 |
How badly anyone was hurt
- No one hurt 1 CPSC: Incident, No Injury
As each report says it, in short words; CPSC’s own words are under each.
The reports, as CPSC published them
Reports people made to the U.S. Consumer Product Safety Commission. CPSC publishes each one after sending it to the company named, and doesn’t guarantee they’re accurate. A report isn’t a recall.
Each report is the words of the person who made it, as CPSC published them. The company’s comments, where CPSC published any, are set apart as the company’s own.
CPSC, SaferProducts.gov public database export. Released Oct 25, 2026. Updated daily.
-
No one hurt Made Aug 3, 2026, sent to the company Aug 6, 2026, published by CPSC Aug 20, 2026
The product, in the report: FEROSTICKER F01 automatic fire extinguisher a compact, self-contained aerosol fire suppression device with no wiring, power, or maintenance requirement. Sold for automatic fire protection inside small enclosed spaces including electrical cabinets, vehicles, and 3D printers. Mounts by adhesive backing or self-tapping screws. Manufacturer specifications, from the instruction leaflet supplied in the packaging: Designation: FEROSTICKER F01 Rated for fire classes A, B, C, E, F
On August 2, 2026, a fire started inside the enclosed chamber of a [REDACTED] 3D printer during a laser cutting operation at my home in Oak Park, Illinois.
Installed inside that chamber was a FEROSTICKER F01 automatic fire extinguisher (item model number K180-5), purchased new through Amazon.com on July 23, 2026 ten days before the incident. The device was installed following the manufacturer’s published guidance: secured by its supplied adhesive to a clean, flat surface at the top of the enclosed area, positioned above the fire risk area, with its discharge nozzle unobstructed and no modification to the device. The chamber volume is 2.99 cubic feet, within the F01’s rated coverage of 3.53 cubic feet.
The manufacturer’s instruction leaflet specifies activation at 170C 10C “or open flame.”
I was present in the room for the duration of the job. Open flame was in direct physical contact with the FEROSTICKER housing. I observed this directly. The device did not activate. No aerosol or suppressant discharged at any point, and the unit remains in an undischarged state.
I extinguished the fire manually. No one was injured.
Damage: the printer is a total loss. Interior components including linear guide rails, timing belts, cable chain, and the exhaust assembly were destroyed by molten material, and the upper chamber structure is deformed. The underside of a separate AMS filament unit resting on top of the printer also melted, in a zone over the chamber exhaust exit.
This product is sold and marketed for unattended protection of enclosed equipment, including 3D printers that commonly run overnight. Had I not been present, the fire would have continued without suppression.
The device, its mounting, and the damaged equipment are preserved uncleaned and available for inspection.
- Model
- K180-5
- Serial number
- Not legible due to fire
- Bought from
- Amazon.com
- Bought
- Jul 23, 2026
- Where
- Oak Park, Illinois: Home/
Apartment/ Condominium - Who was involved
- Unspecified
- The reporter’s relation to them
- Unspecified
- As this report names them
- Brand Ferosticker, made or sold by MB Aeroxfire
- Reports CPSC links to it
- 20260805-EA336-6182866
- How badly, in CPSC’s words
- Incident, No Injury
CPSC’s disclaimer
Disclaimer: CPSC does not guarantee the accuracy, completeness, or adequacy of the contents of the Publicly Available Consumer Product Safety Information Database on SaferProducts.gov, particularly with respect to information submitted by people outside of CPSC.
Word for word, from the disclaimer in CPSC’s export.
Sources
Sources
-
U.S. Consumer Product Safety Commission, SaferProducts.gov public database export.
Released Oct 25, 2026 and checked Oct 25, 2026. Updated daily. Public domain (U.S. Government work). CPSC asks to be credited, and that no endorsement be implied.
Reports of harm are from the U.S. Consumer Product Safety Commission (CPSC), on SaferProducts.gov. CPSC does not endorse Hearth Record.