Hearth Record

Back to Flashlights and lanterns

DORCY flashlights and lanterns

2 reports to CPSC, the latest made Nov 17, 2013. A report isn’t a recall.

Watch it to hear when CPSC publishes new reports about it. CPSC’s own search, on saferproducts.gov

Watch and the shortlist are kept with a free account, on every device. Your watch list. CPSC’s own search is on saferproducts.gov.

At a glance

From SaferProducts.gov, released Oct 25, 2026.

  • 2reports to CPSC
  • Nov 17, 2013the latest report was made
  • Jul 31, 2011the earliest
  • 1with the company’s comments
Brand
DORCY
Maker
Dorcy International, Inc.Makers, importers or sellers, as the reports name them
Product
Flashlights and lanternsCPSC’s product type: Flashlights or Battery-powered Lanterns (code 639), in Yard & Garden: Outdoor Lighting

By month

1 report from December 2012 to November 2013; the most in November 2013, 1. 1 earlier report, since July 2011, is in the table.
The numbers, as a table
Reports to CPSC by the month each was made, newest first
MonthReports
November 20131
July 20111

How badly anyone was hurt

  • No one hurt 2 CPSC: Incident, No Injury

As each report says it, in short words; CPSC’s own words are under each.

The reports, as CPSC published them

Reports people made to the U.S. Consumer Product Safety Commission. CPSC publishes each one after sending it to the company named, and doesn’t guarantee they’re accurate. A report isn’t a recall.

Each report is the words of the person who made it, as CPSC published them. The company’s comments, where CPSC published any, are set apart as the company’s own.

Source:

CPSC, SaferProducts.gov public database export. Released Oct 25, 2026. Updated daily.

  1. No one hurt

    Made Nov 17, 2013, sent to the company Nov 25, 2013, published by CPSC Dec 17, 2013

    The product, in the report: I wish to report a serious and potentially dangerous situation. I have been using both [REDACTED] and other high intensity LED flashlights with a belt sheath and I prefer to use [REDACTED] batteries because they don’t corrode as with other batteries. On 15 November 2013 my 2 cell AA flashlight exploded shooting the lens and reflector out shattering the lens. Luckily no one was injured just shocked by the loud bang and flying debree. I believe the problem is that LEDs require far less voltage to operate than traditional light bulbs and this discharges batteries beyond the threshold of a “bad battery” placing them into a unstable condition where now gasses are produced compared to older light bulbs that get to dim identifying time to replace batteries. Most flashlights are sealed to prevent moisture from entering and under these conditions the gasses have nowhere to go and Bang it explodes. I feel that LED flashlight need a sensor installed to prevent discharging batteries beyond there safety limits and a pressure relief valve installed to prevent dangerous gasses from building up inside the case. Or have Battery manufactures ensure that discharging batteries do not produce gasses! The exploding of my flashlight had serious potential to injure someone, and since many of these sealed flashlights state suitable in hazardous environments a detonation like the one I had can cause an explosion of the hazardous material as we

    I wish to report a serious and potentially dangerous situation. I have been using both [REDACTED] and other high intensity LED flashlights with a belt sheath and I prefer to use [REDACTED] batteries because they don’t corrode as with other batteries. On 15 November 2013 my 2 cell AA flashlight exploded shooting the lens and reflector out shattering the lens. Luckily no one was injured just shocked by the loud bang and flying debree. I believe the problem is that LEDs require far less voltage to operate than traditional light bulbs and this discharges batteries beyond the threshold of tipical “bad battery” placing them into a unstable condition where now gasses are produced compared to older light bulbs that get to dim identifying time to replace batteries. Most flashlights are sealed to prevent moisture from entering and under these conditions the gasses have nowhere to go and Bang it explodes. I feel that LED flashlight need a sensor installed to prevent discharging batteries beyond there safety limits and a pressure relief valve installed to prevent dangerous gasses from building up inside the case. Or have Battery manufactures ensure that discharging batteries do not produce gasses! The exploding of my flashlight had serious potential to injure someone, and since many of these sealed flashlights state suitable in hazardous environments a detonation like the one I had can cause an explosion of the hazardous material as well

    UPC
    041333704647
    Bought from
    WALMART, New Mexico
    Bought
    Jun 9, 2013, about then
    Where
    rio rancho, New Mexico: Home/Apartment/Condominium
    Who was involved
    Unknown
    The reporter’s relation to them
    Self
    As this report names them
    Brand Dorcy, made or sold by Dorcy International, Inc.
    How badly, in CPSC’s words
    Incident, No Injury
  2. No one hurt

    Made Jul 31, 2011, published by CPSC Aug 22, 2011

    The product, in the report: Rechargeable flashlight

    DORCY UL listed Rechargeable flashlight model FD-8388E120VAC 60Hz. Below this model number are the alphanumeric characters 3H57 E159950 50mA Batteries are original, flashlight was not tampered with. Flashlight was plugged into the wall in accordance with directions. Flashlight exploded causiing a 4 inch diameter fireball and a very loud noise. The flashlight partially split and the battery compartment cover was displaced into the split along the seam of the flashlight. The switch and bulb are intact and the flashlight still comes on when you use the switch.

    Model
    FD-8388E120VAC 60Hz
    Serial number
    3H57 E159950
    Bought from
    MCAS Cherry Point Exchange
    Bought
    Jul 22, 2011, about then
    Where
    Havelock, North Carolina: Home/Apartment/Condominium
    Who was involved
    Unspecified
    The reporter’s relation to them
    Unspecified
    As this report names them
    Brand DORCY, made or sold by Dorcy International, Inc.
    How badly, in CPSC’s words
    Incident, No Injury

CPSC’s disclaimer

Disclaimer: CPSC does not guarantee the accuracy, completeness, or adequacy of the contents of the Publicly Available Consumer Product Safety Information Database on SaferProducts.gov, particularly with respect to information submitted by people outside of CPSC.

Source:

Word for word, from the disclaimer in CPSC’s export.

Sources

Sources
  • U.S. Consumer Product Safety Commission, SaferProducts.gov public database export.

    Released Oct 25, 2026 and checked Oct 25, 2026. Updated daily. Public domain (U.S. Government work). CPSC asks to be credited, and that no endorsement be implied.

Source:

Reports of harm are from the U.S. Consumer Product Safety Commission (CPSC), on SaferProducts.gov. CPSC does not endorse Hearth Record.

Back to Flashlights and lanterns

How to read a record

Four things every record does, shown on an example record made up for this guide.

An example record, made up for this guide

An example nursing home

Made up for this guide: no real place is shown

Not fully inspected in over two years (CMS flag)

11 health citations at the latest inspection cycle

The state average is 14.3.

Source:

CMS, State and US Averages and Health Deficiencies. Released Oct 8, 2026. Updated monthly.

From the homeNone yet. Replies and paid listings aren’t open, and when they open they will sit here, below the record.

1 of 4

Every fact names its source.

Who published it, when, and how often it changes sit beside each fact, with a link to the agency’s own file.

Sign in

A free account keeps your watch list, shortlists, comparisons and saved searches on every device, and can email you when something you watch changes. Browsing never needs one.