Vending Miser Model 2 electric wiring
1 report to CPSC, the latest made Jun 3, 2013. A report isn’t a recall.
Watch and the shortlist are kept with a free account, on every device. Your watch list. CPSC’s own search is on saferproducts.gov.
At a glance
From SaferProducts.gov, released Oct 25, 2026.
- 1report to CPSC
- Jun 3, 2013the latest report was made
- Jun 3, 2013the earliest
- 0with the company’s comments
- Brand
- Vending Miser Model 2
- Maker
- Bayview Technology Group Inc.Makers, importers or sellers, as the reports name them
- Product
- Electric wiringNot panel boards or outletsCPSC’s product type: Electric Wire or Wiring Systems (Excl Panelboards Recept (code 4062), in Home Maintenance and Structures: Electrical Systems
By month
The numbers, as a table
| Month | Reports |
|---|---|
| June 2013 | 1 |
How badly anyone was hurt
- No one hurt 1 CPSC: Incident, No Injury
As each report says it, in short words; CPSC’s own words are under each.
The reports, as CPSC published them
Reports people made to the U.S. Consumer Product Safety Commission. CPSC publishes each one after sending it to the company named, and doesn’t guarantee they’re accurate. A report isn’t a recall.
Each report is the words of the person who made it, as CPSC published them. The company’s comments, where CPSC published any, are set apart as the company’s own.
CPSC, SaferProducts.gov public database export. Released Oct 25, 2026. Updated daily.
-
No one hurt Made Jun 3, 2013, sent to the company Aug 22, 2013, published by CPSC Jun 25, 2013
The product, in the report: Vending Miser Model 2 - power regulator for vending machines
Investigation with MR173 of the devise determined it was a Vending Miser Model 2 which was attached in line from the electrical plug to the [REDACTED] machine.Bayview Technology Group Inc. 800 770 8539. UL listed. Listed (ITE)9T79 C 120 vac 50/60 hz. The unit had extensive burning to the bottom and damage to the top and burned the cord. The wall plug in had yellowish dark coloration to the top plug in. The breaker did not trip per EN1711 who stated it was arcing when they moved the [REDACTED] machine. Photos were taken and are attached to this report. MR172/173 met with maintenance and management and advised them of the cause of the alarm and advised them to have an Electrician check out the circuit. The Fire Alarm system was reset.
- Model
- Model 2
- Where
- Richland, Washington: Other
- Who was involved
- Unknown
- The reporter’s relation to them
- Unspecified
- As this report names them
- Brand Vending Miser Model 2, made or sold by Bayview Technology Group Inc.
- How badly, in CPSC’s words
- Incident, No Injury
CPSC’s disclaimer
Disclaimer: CPSC does not guarantee the accuracy, completeness, or adequacy of the contents of the Publicly Available Consumer Product Safety Information Database on SaferProducts.gov, particularly with respect to information submitted by people outside of CPSC.
Word for word, from the disclaimer in CPSC’s export.
Sources
Sources
-
U.S. Consumer Product Safety Commission, SaferProducts.gov public database export.
Released Oct 25, 2026 and checked Oct 25, 2026. Updated daily. Public domain (U.S. Government work). CPSC asks to be credited, and that no endorsement be implied.
Reports of harm are from the U.S. Consumer Product Safety Commission (CPSC), on SaferProducts.gov. CPSC does not endorse Hearth Record.