Revolv gas furnaces
1 report to CPSC, the latest made Feb 10, 2016. A report isn’t a recall.
Watch and the shortlist are kept with a free account, on every device. Your watch list. CPSC’s own search is on saferproducts.gov.
At a glance
From SaferProducts.gov, released Oct 25, 2026.
- 1report to CPSC
- Feb 10, 2016the latest report was made
- Feb 10, 2016the earliest
- 0with the company’s comments
- Brand
- Revolv
- Maker
- Style Crest Enterprises, Inc.Makers, importers or sellers, as the reports name them
- Product
- Gas furnacesCPSC’s product type: Gas Furnaces (code 310), in Home Maintenance and Structures: Heating, Ventilation & Air Conditioning
By month
The numbers, as a table
| Month | Reports |
|---|---|
| February 2016 | 1 |
How badly anyone was hurt
- No one hurt 1 CPSC: Incident, No Injury
As each report says it, in short words; CPSC’s own words are under each.
The reports, as CPSC published them
Reports people made to the U.S. Consumer Product Safety Commission. CPSC publishes each one after sending it to the company named, and doesn’t guarantee they’re accurate. A report isn’t a recall.
Each report is the words of the person who made it, as CPSC published them. The company’s comments, where CPSC published any, are set apart as the company’s own.
CPSC, SaferProducts.gov public database export. Released Oct 25, 2026. Updated daily.
-
No one hurt Made Feb 10, 2016, sent to the company Jun 10, 2016, published by CPSC Jun 24, 2016
The product, in the report: gas furnace
Style Crest knowingly sold me a Revolve furnace manufactured date 3-23-2012 with a defective burner box and IFC. They did not put out a recall. They caused a huge delay in the services and have portrayed a great deal of resistance towards obtaining resolutions. Purchase Date: 9/26/2014 Problem Date: 2/19/2015 Model Number: VMA1-50N Serial Number: DN221730 Order Number: [REDACTED] Payment Amount: $2,844.00 Payment Method: Check Style Crest Knowingly sold me a furnace with a defective burner box and Integrated Furnace Controller (IFC). They deliberately deviated from their duty bound responsibility to inform the general public and Capital Supply and Services of the engineering change of the defective burner box. Style Crest has burdened the consumers with their mistakes only to save their company money by not putting out a recall for correction. They knew the retainer holes for the flame rectification rod and the igniter was reversed which caused my furnace to exhibit explosive ignitions, numerous ignition failures and damages to other components of my furnace. It was myself and a technician from Capital Supply and Services that figured out the engineering problem that Style Crest and their affiliates had prior knowledge of. With that said, Style Crest sent a new top section of the burner box with engineering changes to it with high hopes that I and the technician would not catch. I myself having a Associates degree in Applied Science in HVAC informed the technician that the defective burner box was stamped out incorrectly and Style Crest and their engineers knew of the their mistake. Later on they made engineering changes to the defective burner box. Nonetheless, they did not share this with the general public for the purpose of saving their company money by not doing a recall. It is my educated opinion that Style Crest and their affiliates demonstrated reckless business conduct. I’m not ruling out the likelihood that property damage, personal injuries, or death may result due to the defective burner box that was in my furnace and most likely are in other furnaces purchased by other consumers. I have pictures, videos and invoices that reflect the above mentioned. There have been two new Integrated Furnace Controllers (IFC’s) replaced by installers on my furnace since the original installation (9/26/2014). Therefore, that makes three IFC’s on my furnace that display the faulty five flash code with no resolution. On rare occasions, my furnace still demonstrates a faulty five flash code that does not exists in the owners manual. The faulty five flash code does not allow my furnace to cycle properly. One of my many concerns is that there is rust in the burner box. I have made the installers (Capitol Supply) and the manufacturers (Style Crest) aware of my concerns about the rust in the burner box also with no resolution.
I have also reported this to the BBB and made available for the public review.
- Model
- VMA1-50N
- UPC
- Unknown
- Serial number
- DN221730
- Bought from
- Capitol Supply & Service
- Bought
- Sep 26, 2014
- Where
- Mt Morris, Michigan: Home/
Apartment/ Condominium - Who was involved
- Unspecified
- The reporter’s relation to them
- Unspecified
- As this report names them
- Brand Revolv, made or sold by Style Crest Enterprises, Inc.
- How badly, in CPSC’s words
- Incident, No Injury
CPSC’s disclaimer
Disclaimer: CPSC does not guarantee the accuracy, completeness, or adequacy of the contents of the Publicly Available Consumer Product Safety Information Database on SaferProducts.gov, particularly with respect to information submitted by people outside of CPSC.
Word for word, from the disclaimer in CPSC’s export.
Sources
Sources
-
U.S. Consumer Product Safety Commission, SaferProducts.gov public database export.
Released Oct 25, 2026 and checked Oct 25, 2026. Updated daily. Public domain (U.S. Government work). CPSC asks to be credited, and that no endorsement be implied.
Reports of harm are from the U.S. Consumer Product Safety Commission (CPSC), on SaferProducts.gov. CPSC does not endorse Hearth Record.