Infinity cribs, not portable
2 reports to CPSC, the latest made Sep 13, 2014. A report isn’t a recall.
Watch and the shortlist are kept with a free account, on every device. Your watch list. CPSC’s own search is on saferproducts.gov.
At a glance
From SaferProducts.gov, released Oct 25, 2026.
- 2reports to CPSC
- Sep 13, 2014the latest report was made
- Jul 9, 2013the earliest
- 2with the company’s comments
- Brand
- Infinity
- Maker
- BABY’S DREAM FURNITURE, INC.Makers, importers or sellers, as the reports name them
- Product
- Cribs, not portableCPSC’s product type: Nonportable Cribs (code 1543), in Baby: Nursery Equipment & Supplies
Other ways the reports write the brand (1)
“Infinity collection”
By month
The numbers, as a table
| Month | Reports |
|---|---|
| September 2014 | 1 |
| July 2013 | 1 |
How badly anyone was hurt
- No one hurt 2 CPSC: Incident, No Injury
As each report says it, in short words; CPSC’s own words are under each.
The reports, as CPSC published them
Reports people made to the U.S. Consumer Product Safety Commission. CPSC publishes each one after sending it to the company named, and doesn’t guarantee they’re accurate. A report isn’t a recall.
Each report is the words of the person who made it, as CPSC published them. The company’s comments, where CPSC published any, are set apart as the company’s own.
CPSC, SaferProducts.gov public database export. Released Oct 25, 2026. Updated daily.
-
No one hurt Made Sep 13, 2014, sent to the company Sep 22, 2014, published by CPSC Oct 6, 2014
The product, in the report: Solid Wood, Amber stain. Convertible Crib - crib to toddler bed to adult bed
In 2007, the Infinity Collection Convertible Crib by Baby’s Dream Furniture Inc was purchased at Buy Buy Baby. It was used as a crib and then converted into the toddler bed. The crib/bed was used infrequently as our child often slept in parents’ bed. Over time, the screws became loose and the when we tried to fasten the screws again, the screws would not make contact with the nuts and the screws could not be tightened. The holes where the screws entered had become too large for the screws.
We were concerned and tried to return the bed to Buy Buy Baby in 2012. We were told that we would have to contact Baby’s Dream. Baby’s Dream said they would send new larger connectors that may fit into worn holes. However, we felt that this solution would only be a temporary fix and would not prevent further deterioration of the holes. We felt the bed was no longer safe to use.
- Bought from
- Buy Buy Baby, Maryland
- Bought
- Apr 2, 2007
- Where
- Unspecified: Home/
Apartment/ Condominium - Who was involved
- Unknown
- The reporter’s relation to them
- Unspecified
- As this report names them
- Brand Infinity collection, made or sold by BABY’S DREAM FURNITURE, INC.
- How badly, in CPSC’s words
- Incident, No Injury
-
No one hurt Made Jul 9, 2013, sent to the company Nov 25, 2013, published by CPSC Dec 10, 2013
The product, in the report: Fold down half gate crib
Caller is owner of two Daycare locations and has been a daycare owner for the past 18yrs.
She replaced her old cribs with cribs purchased October 25th, 2012/manufactured January 12, 2012
Caller has one yr old in her daycare that has literally eaten bites out of the slats and top bar of crib. Caller states that these are not gnawing or chewing marks, they are bite marks. She is reporting that these new cribs have much softer wood that could result in children choking if wood becomes swallowed or caught in throat.
She has four of these cribs with two at one location and two at the second location. One has never been used, one has been used by new infant, the third has a couple of chewing marks but this one is only at the daycare six hours per week over periods of two days per week.
Caller would like for an investigator to examine this crib and the wood with which it is manufactured before there are injuries.
UPDATE 10/15/13: Bits of wood is now being found on the floor under the crib. More destruction and missing wood is taking place.
UPDATE 10/23/13: Since that report and my other update earlier this month, I wanted to share my current experience of disassembling the Infinity cribs. We have not used them in awhile because of the safety concerns already stated; however, I thought you should also know what I discovered when I went to place these in storage today. 1. One of the cribs’ two fastening screws that attach the left side panel to the front panel were not being gripped by the wood. They just slid out without the need to unscrew them. Again, I believe this is an indication of soft wood. 2. The other crib’s spring mattress support was bent over 1.5” in the frame that runs along the back of the crib. It was concave. I thought this was one of the main changes with the new Federal regulations that changed to higher strengths?? I have attached the photos of these issues.
- Model
- INDCPNCN
- Serial number
- 4792-3, number 253 in Chestnut
- Where
- Sheboygan, Wisconsin: Home/
Apartment/ Condominium - Who was involved
- Unspecified
- The reporter’s relation to them
- Unspecified
- As this report names them
- Brand Infinity, made or sold by BABY’S DREAM FURNITURE, INC.
- How badly, in CPSC’s words
- Incident, No Injury
CPSC’s disclaimer
Disclaimer: CPSC does not guarantee the accuracy, completeness, or adequacy of the contents of the Publicly Available Consumer Product Safety Information Database on SaferProducts.gov, particularly with respect to information submitted by people outside of CPSC.
Word for word, from the disclaimer in CPSC’s export.
Sources
Sources
-
U.S. Consumer Product Safety Commission, SaferProducts.gov public database export.
Released Oct 25, 2026 and checked Oct 25, 2026. Updated daily. Public domain (U.S. Government work). CPSC asks to be credited, and that no endorsement be implied.
Reports of harm are from the U.S. Consumer Product Safety Commission (CPSC), on SaferProducts.gov. CPSC does not endorse Hearth Record.