Walkinstin- unverified canning jars

The reports, as CPSC published them

1. First aid

   Made Oct 11, 2026 · , sent to the company Oct 21, 2026 · , published by CPSC Nov 4, 2026

   The product, in the report: The product is a 21.5-quart water-bath canning pot and accessory kit, sold through Amazon under ASIN B0GQM6RP3F and identified in a third-party retailer listing as a Walkinstin canning kit. The kit includes a large, silver-colored aluminum cooking pot, a removable wire rack, a glass lid with a metal perimeter rim and screw-mounted handle, and additional canning accessories. The affected component is the circular, transparent glass lid. Its handle is secured through a central opening in the glass using a metal retaining screw and washer, with a small synthetic gasket positioned between the underside washer and the glass. The upper metal handle mounting surface contacts the glass directly. The lid is designed to cover the cooking vessel during water-bath canning or other cooking activities, helping retain heat and steam. The glass lid catastrophically shattered during manual tightening of its handle-retaining screw, before its first use. Product identification: Product: 21.5-Quart Water Bath Canning Pot with Rack and Lid Reported brand/manufacturer: Walkinstin (third-party retailer identification) Amazon ASIN: B0GQM6RP3F Reported model: WKSD-GTTZBXGHSD_18CMBXGNG_15PACK Pot color/material: Silver-colored aluminum Lid: Transparent glass with metal rim and screw-mounted handle Capacity: 21.5 US quarts (approximately 20.3 liters) The exact lid diameter and glass thickness have not been independently measured. Photographs of the damaged lid, handle mounting assembly, and supplied instructions are available.

   I am reporting a potentially serious consumer product safety hazard involving the glass lid supplied with a 21.5-quart water-bath canning kit sold through Amazon (ASIN B0GQM6RP3F).

   I received this product through the Amazon Vine evaluation program and had previously used the aluminum cooking pot and accompanying wire rack without incident. I had used these components to gently heat delicate fruit preparations in individual containers suspended above boiling water. The glass lid had not previously been used or exposed to cooking temperatures.

   While preparing for a subsequent cooking session, I decided to install the glass lid to improve steam retention and temperature uniformity within the vessel.

   Before assembly, I observed roughness and what appeared to be minute cracks surrounding the manufactured opening in the glass where the handle attaches. Because the lid was brand new, I assumed these irregularities were normal characteristics of its manufacture rather than evidence of a structural defect.

   The lid’s handle was loose and could rotate. While seated on my couch, I used the screwdriver attachment on a pocketknife to manually tighten the retaining screw. As the screw became sufficiently tight to prevent the handle from rotating, the glass lid suddenly and violently shattered, projecting sharp glass fragments outward.

   The failure was instantaneous and occurred without the lid being heated, dropped, struck, or subjected to cooking conditions.

   I sustained several small cuts to my hand from the glass fragments. Additional small fragments contacted my body. Fortunately, I was wearing eyeglasses, which may have prevented a serious eye injury. Given the violent fragmentation and proximity of my face and hands to the lid, the potential for severe lacerations or permanent eye damage was substantial.

   Following the incident, I examined the remaining handle assembly. The metal handle appears to bear directly against the upper surface of the glass, while a small synthetic gasket separates the retaining screw’s metal washer from the underside of the glass. The supplied one-page assembly instructions contain no tightening torque specifications, warnings against excessive tightening, or guidance concerning apparent cracks or irregularities around the handle mounting hole.

   I am concerned that the glass may have contained preexisting manufacturing defects around the mounting opening, that the handle attachment design may concentrate mechanical stress in the glass, or that both conditions contributed to the failure. I cannot independently determine the precise cause.

   Of particular concern is that the failure occurred during an ordinary, foreseeable assembly or adjustment procedure, before the lid had ever been used for cooking. A consumer attempting to secure a loose handle could unknowingly trigger a violent glass fracture, potentially resulting in serious injuries to the hands, face, or eyes.

   I have retained the damaged lid, glass fragments, handle assembly, and original instructions. Photographs document the shattered glass and the remaining mounting hardware.

   I am submitting this report to request that the Consumer Product Safety Commission evaluate this product for potential manufacturing, design, and warning deficiencies and determine whether similar products may pose an unreasonable risk of injury to consumers.

   Model

   WKSD-GTTZBXGHSD_18CMBXGNG_15PACK

   UPC

   Unknown

   Serial number

   Unknown

   Bought from

   Amazon

   Bought

   Jul 9, 2026

   Where

   Annapolis, Maryland: Home/Apartment/Condominium

   Who was involved

   Age 59, Male

   The reporter’s relation to them

   Self

   As this report names them

   Brand Walkinstin- unverified, made or sold by Walkinstin Inc

   How badly, in CPSC’s words

   Injury, First Aid Received by Non-Medical Professional

CPSC’s disclaimer

Sources