Hair Entrapment Danger In Whirlpool Bath Suction Covers
Home product recall 94-120. Announced by CPSC on Aug 24, 1994.
Watch and the shortlist are kept with a free account, on every device. Your watch list. CPSC’s own notice is on cpsc.gov.
The short answer
Announced by CPSC on Aug 24, 1994. Copied from CPSC on Oct 19, 2026.
Every line below is in CPSC’s own words, with its source beside it.
What’s wrong with it?
The notice gives no hazard in a field of its own.
CPSC, Recalls API. Checked Oct 19, 2026. Updated daily.
What should you do?
The notice gives no remedy in a field of its own.
CPSC, Recalls API. Checked Oct 19, 2026. Updated daily.
Which ones are recalled?
August 24, 1994 Release # 94-120 Washington, DC -- CPSC, HydraBaths Inc. of Santa Ana, Calif., is voluntarily recalling its model 20313X, 2031XX, and 203 whirlpool bath suction covers. These covers were manufactured prior to implementation of voluntary industry standards in 1985. HydraBaths estimates that there are about 40,000 whirlpool baths in use that have these suction covers.Whirlpool baths typically have one or two suction openings to draw in and circulate water. Each suction opening should have a cover designed to protect against entrapment of the bather’s body parts and hair due to high suction forces. The recalled suction covers, which were not designed with such protection, may entangle a bather’s hair into the openings, causing the bather’s head to be held under water, which can result in drowning.To date, HydraBaths received two reports of hair entrapments. One entrapment resulted in a drowning death and the other was a near drowning.The recalled round covers can be identified by holes that are slotted or square shaped and larger than 1/8 inch. There are no visible markings on the covers that tell which model they are. The recalled covers were sold nationally before 1985 (as a component on whirlpool baths) to bathtub manufacturers, plumbing wholesalers, and distributors.HydraBaths suction covers distributed after 1985 are not involved in this recall and can be identified by the visible markings HB-8, SC-1, or SC-4 on the cover and by holes that are circular and 1/8 inch or smaller.HydraBaths and CPSC advise consumers to stop using whirlpools with the recalled suction covers. HydraBaths will send you free replacement suction covers. Call them at (714) 556-9133 or write them at HydraBaths, Recall Department, 2100 S. Fairview, Santa Ana, CA 92704 for free replacement suction covers.Consumers who are unsure if they have a recalled suction cover can call or write HydraBaths to help make that determination. Consumers who write should enclose a photo of their cover
HydraBath whirlpool bath suction covers.
CPSC, Recalls API. Checked Oct 19, 2026. Updated daily.
Who made and sold it?
- Made by HydraBaths.
CPSC, Recalls API. Checked Oct 19, 2026. Updated daily.
Was anyone hurt?
The notice doesn’t say whether anyone was hurt.
CPSC, Recalls API. Checked Oct 19, 2026. Updated daily.
What the record doesn’t say
- The notice lists no UPCs, so check the model, the description and the photos.
- The notice lists no model numbers in a field of their own; its description may give them.
- How many have been returned or fixed isn’t in the notice.
Hearth Record wrote these lines.
Sources
-
U.S. Consumer Product Safety Commission, Recalls API.
Checked Oct 19, 2026. Updated daily. Public domain (U.S. Government work). CPSC asks to be credited, and that no endorsement be implied.
Recalls of kids’ and home products are from the U.S. Consumer Product Safety Commission (CPSC). CPSC does not endorse Hearth Record. Copied on Oct 19, 2026.