Schwinn Xr-5 Exercisers Still Need Safety Modification

The notice gives no hazard in a field of its own.

The notice gives no remedy in a field of its own.

OCTOBER 8, 1991 Release # 92-004 Schwinn Xr-5 Exercisers Still Need Safety Modification Washington, DC -- Together with the U.S. Consumer Product Safety Commission (CPSC), Schwinn Bicycle Company of Chicago, IL is urging consumers who own a Schwinn XR-5 exerciser, manufactured between 1971 and 1977, to take part in a voluntary safety program if that unit was not modified in response to a previous safety notification involving 171,000 units in 1984. The response rate to the earlier program was low; Schwinn subsequently received 10 additional reports of injury, bringing the total number injured to 30. The reports received by Schwinn indicate that unsupervised children and infants have been injured when their fingers or toes got caught in the rear sprocket-chain juncture point on the left side of the XR-5 exerciser, resulting in amputation or other personal injury. There have also been reports of injuries occurring at the front sprocket-chain juncture point on the right side of unmodified units. As the manufacturer of this product, Schwinn is concerned about any type of injury allegedly associated with its products. As a result, Schwinn Bicycle Company is again offering to install or provide, at no charge, a Chainguard Retro Fit Kit that should help prevent potential harm to unsupervised children. If you own an XR-5, make sure small children do not play on or around your XR-5 unit. As indicated in the unit’s owner’s manual, when the unit is not in use, tighten the tension control knob located on the control panel so the pedals cannot be turned by small children, or place the unit in a locked or secure room. If you own an XR-5 unit which has not been modified, you should immediately make arrangements with your local authorized Schwinn dealer for installation of an XR-5 Chainguard Retro Fit Kit (part #90518). Installation will be done at no charge to the consumer. If you are unable to bring in your XR-5 unit, call Schwinn’s Consumer Relations Department at 1-800-633-0231, and they will send you a Chainguard Retro Fit Kit so that you can install it yourself. However, Schwinn recommends that you have your authorized Schwinn dealer make the installation. If you sold or gave away your XR-5 unit, please let the new owner know of this safety program or call 1-800-633-0231 with the name and address of the person who now owns the unit and Schwinn will contact the new owner. For further information, please contact your local authorized Schwinn dealer or call 1-800-633-0231. The U.S. Consumer Product Safety Commission is announcing this modification program as part of its mission to protect the public from unreasonable risks of injury and death associated with consumer products. The Commission’s objective is to help reduce the estimated 28.5 million injuries and 21,600 deaths that are associated each year with the 15,000 different types of consumer products under CPSC’s jurisdiction

Schwinn XR-5 exerciser bicycles.