Safety Alert: Robert Bosch Tool Corp. Abrasive Cut-Off Wheels Lack Safety Warning Label
Home product recall 06-184. Announced by CPSC on Jun 9, 2006.
Watch and the shortlist are kept with a free account, on every device. Your watch list. CPSC’s own notice is on cpsc.gov.
The short answer
Announced by CPSC on Jun 9, 2006. Copied from CPSC on Oct 19, 2026.
Every line below is in CPSC’s own words, with its source beside it.
What’s wrong with it?
The Abrasive Cut-Off Wheel packages are not properly labeled with precautionary information on proper use and operation. The failure of a user to follow the instructions below could result in injury. “! WARNING Read, understand and comply with tool manual before use. Follow OSHA and ANSI B7.1 standards. Use eye, face, dust and ear protection. Wear body apron and gloves. Speed rating of wheel must be greater than tool speed. Do not grind without guard adjusted for maximum operator protection. Mount wheel with the tool flanges provided. Run-in for one minute before application. Do not jam, twist or pinch wheel in work piece or apply excessive side pressure to the wheel. RECOIL may occur if wheel is jammed. Do not use near flammable materials or gases; fire or explosion may result. Do not expose to water, condensation or freezing. Discard wheel if dropped, cracked or chipped.”
CPSC, Recalls API. Checked Oct 19, 2026. Updated daily.
What should you do?
Consumers with abrasive cut-off wheels that are missing the safety instructions should contact Vermont American Customer Service to obtain safety warning information.
CPSC, Recalls API. Checked Oct 19, 2026. Updated daily.
- How to reach the firm: Call Robert Bosch Tool Corp. at (800) 742-3869 between 7 a.m. and 7 p.m. CT Monday thru Friday.
Which ones are recalled?
The wheels have a black, abrasive exterior; a red circular label on the interior; and are used to clean, slot, nick and cut metal. The wheels were sold under the “Vermont American” brand name had the following catalog numbers, diameters and blade thickness: Item # Diameter Blade Thickness 28026 6-1/2” 1/8” 28027 7”-7-1/4” 1/8” 28028 8” 1/8” 28030 10” 1/8” 28032 12” 1/8” 28033 14” 1/8”
About 400,000 units, as CPSC gives them.
Vermont American® Abrasive Cut-Off Wheels.
CPSC, Recalls API. Checked Oct 19, 2026. Updated daily.
CPSC’s photos
CPSC shows 1 photo on its notice. Hearth Record doesn’t copy them; each opens on cpsc.gov.
Who made and sold it?
- Made by Robert Bosch Tool Corp., Mt. Prospect, Ill..
- Industrial distributors nationwide from January 2001 through September 2005 for between $5 and $15.
- Made in Canada, as the notice gives it.
CPSC, Recalls API. Checked Oct 19, 2026. Updated daily.
Was anyone hurt?
None reported.
CPSC, Recalls API. Checked Oct 19, 2026. Updated daily.
What the record doesn’t say
- The notice lists no UPCs, so check the model, the description and the photos.
- The notice lists no model numbers in a field of their own; its description may give them.
- How many have been returned or fixed isn’t in the notice.
Hearth Record wrote these lines.
Sources
-
U.S. Consumer Product Safety Commission, Recalls API.
Checked Oct 19, 2026. Updated daily. Public domain (U.S. Government work). CPSC asks to be credited, and that no endorsement be implied.
Recalls of kids’ and home products are from the U.S. Consumer Product Safety Commission (CPSC). CPSC does not endorse Hearth Record. Copied on Oct 19, 2026.